View GRM216XXXXXX_253116.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
C02E10.pdf 04.1.20
www..com
Chip Monolithic Ceramic Capacitors
for Flow/Reflow Soldering GRM15/18/21/31 Series
e g e
1
s Features
1. Terminations are made of metal highly resistant to migration. 2. The GRM series is a complete line of chip ceramic capacitors in 6.3V, 10V, 16V, 25V, 50V, 100V, 200V and 500V ratings. These capacitors have temperature characteristics ranging from C0G to Y5V. 3. A wide selection of sizes is available, from the miniature LxWxT: 1.0x0.5x0.5mm to LxWxT: 3.2x1.6x1.15mm. GRM18, 21 and GRM31 types are suited to flow and reflow soldering. GRM15 type is applied to only reflow soldering. 4. Stringent dimensional tolerances allow highly reliable, high speed automatic chip placement on PCBs. 5. The GRM series is available in paper or plastic embossed tape and reel packaging for automatic placement. Bulk case packaging is also available for GRM15, GRM18 and GRM21.
L
W
Part Number GRM155 GRM188* GRM216 GRM219 GRM21A GRM21B GRM316 GRM319 GRM31M GRM31C
Dimensions (mm) L W T e 1.0 0.05 0.5 0.05 0.5 0.05 0.15 to 0.3 1.6 0.1 0.8 0.1 0.8 0.1 0.2 to 0.5 0.6 0.1 0.85 0.1 2.0 0.1 1.25 0.1 0.2 to 0.7 1.0 +0/-0.2 1.25 0.1 0.6 0.1 3.2 0.15 1.6 0.15 0.85 0.1 0.3 to 0.8 1.15 0.1 3.2 0.2 1.6 0.2 1.6 0.2
T
g min. 0.4 0.5 0.7
1.5
* Bulk Case : 1.6 0.07(L)g0.8 0.07(W)g0.8 0.07(T)
s Applications
General electronic equipment
Temperature Compensating Type GRM15 Series (1.0x0.5 mm) 50V/25V
Part Number L x W [EIA] TC Rated Volt. GRM15
1.00x0.50 [0402] C0G (5C) 50 (1H) P2H (6P) 50 (1H) R2H (6R) 50 (1H) S2H (6S) 50 (1H) 50 (1H) SL (1X) 25 (1E) T2H (6T) 50 (1H) U2J (7U) 50 (1H)
Capacitance (Capacitance part numbering code) and T (mm) Dimension (T Dimension part numbering code) 0.50pF(R50) 0.75pF(R75) 1.0pF(1R0) 2.0pF(2R0) 3.0pF(3R0) 4.0pF(4R0) 5.0pF(5R0) 6.0pF(6R0) 7.0pF(7R0) 8.0pF(8R0) 9.0pF(9R0) 10pF(100) 12pF(120) 15pF(150) 18pF(180) 22pF(220) 27pF(270) 33pF(330) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5)
Continued on the following page.
7
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
C02E10.pdf 04.1.20
www..com
Continued from the preceding page.
1
Part Number L x W [EIA] TC Rated Volt.
GRM15
1.00x0.50 [0402] C0G (5C) 50 (1H) P2H (6P) 50 (1H) R2H (6R) 50 (1H) S2H (6S) 50 (1H) 50 (1H) SL (1X) 25 (1E) T2H (6T) 50 (1H) U2J (7U) 50 (1H)
Capacitance (Capacitance part numbering code) and T (mm) Dimension (T Dimension part numbering code) 39pF(390) 47pF(470) 56pF(560) 68pF(680) 82pF(820) 100pF(101) 120pF(121) 150pF(151) 180pF(181) 220pF(221) 270pF(271) 330pF(331) 390pF(391) 470pF(471) 560pF(561) 680pF(681) 820pF(821) 1000pF(102) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5) 0.50(5)
The part numbering code is shown in ( ). Dimensions are shown in mm and Rated Voltage in Vdc.
Temperature Compensating Type GRM18 Series (1.60x0.80 mm) 200V/100V/50V/25V
Part Number L x W [EIA] TC Rated Volt. GRM18
1.60x0.80 [0603] C0G (5C) 200 (2D) 100 (2A) 50 (1H) P2H (6P) 50 (1H) R2H (6R) 50 (1H) S2H (6S) 50 (1H) 200 (2D) 100 (2A) SL (1X) 50 (1H) 25 (1E) T2H (6T) 50 (1H) U2J (7U) 50 (1H)
Capacitance (Capacitance part numbering code) and T (mm) Dimension (T Dimension part numbering code) 0.50pF(R50) 0.75pF(R75) 1.0pF(1R0) 2.0pF(2R0) 3.0pF(3R0) 4.0pF(4R0) 5.0pF(5R0) 6.0pF(6R0) 7.0pF(7R0) 8.0pF(8R0) 9.0pF(9R0) 10pF(100) 12pF(120) 15pF(150) 18pF(180) 22pF(220) 27pF(270) 33pF(330) 39pF(390) 47pF(470) 56pF(560) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8)
Continued on the following page.
8
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
C02E10.pdf 04.1.20
www..com
Part Number L x W [EIA] TC Rated Volt.
Continued from the preceding page.
GRM18
1.60x0.80 [0603] C0G (5C) 200 (2D) 100 (2A) 50 (1H) P2H (6P) 50 (1H) R2H (6R) 50 (1H) S2H (6S) 50 (1H) 200 (2D) 100 (2A) SL (1X) 50 (1H) 25 (1E) T2H (6T) 50 (1H) U2J (7U) 50 (1H)
1
Capacitance (Capacitance part numbering code) and T (mm) Dimension (T Dimension part numbering code) 68pF(680) 82pF(820) 100pF(101) 120pF(121) 150pF(151) 180pF(181) 220pF(221) 270pF(271) 330pF(331) 390pF(391) 470pF(471) 560pF(561) 680pF(681) 820pF(821) 1000pF(102) 1200pF(122) 1500pF(152) 1800pF(182) 2200pF(222) 2700pF(272) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.80(8)
The part numbering code is shown in ( ). Dimensions are shown in mm and Rated Voltage in Vdc.
Temperature Compensating Type GRM21 Series (2.00x1.25 mm) 200V/100V/50V/25V
Part Number L x W [EIA] TC Rated Volt. GRM21
2.00x1.25 [0805] C0G (5C) 200 (2D) 100 (2A) 50 (1H) C0H (6C) 25 (1E) P2H (6P) 50 (1H) R2H (6R) 50 (1H) S2H (6S) 50 (1H) 200 (2D) 100 (2A) SL (1X) 50 (1H) 25 (1E) T2H (6T) 50 (1H) U2J (7U) 50 (1H)
Capacitance (Capacitance part numbering code) and T (mm) Dimension (T Dimension part numbering code) 12pF(120) 15pF(150) 18pF(180) 22pF(220) 27pF(270) 33pF(330) 39pF(390) 47pF(470) 56pF(560) 68pF(680) 82pF(820) 100pF(101) 120pF(121) 150pF(151) 180pF(181) 220pF(221) 270pF(271) 330pF(331) 390pF(391) 0.85(9) 0.85(9) 0.85(9) 0.85(9) 0.85(9) 0.85(9) 0.85(9) 0.85(9) 0.85(9) 1.25(B) 1.25(B) 1.25(B) 1.25(B) 1.25(B) 1.25(B) 1.25(B) 0.85(9) 0.85(9) 0.60(6) 0.60(6) 0.60(6) 0.60(6) 0.60(6) 0.60(6) 0.60(6) 0.60(6) 0.85(9) 0.85(9) 0.85(9) 0.85(9) 1.25(B) 0.85(9) 0.85(9) 0.85(9) 0.85(9) 0.85(9) 0.85(9) 0.85(9) 0.85(9) 1.25(B) 1.25(B) 1.25(B) 1.25(B) 1.25(B) 1.25(B)
Continued on the following page.
9
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
C02E10.pdf 04.1.20
www..com
Continued from the preceding page.
1
Part Number L x W [EIA] TC Rated Volt.
GRM21
2.00x1.25 [0805] C0G (5C) 200 (2D) 100 (2A) 50 (1H) C0H (6C) 25 (1E) P2H (6P) 50 (1H) R2H (6R) 50 (1H) S2H (6S) 50 (1H) 200 (2D) 100 (2A) SL (1X) 50 (1H) 25 (1E) T2H (6T) 50 (1H) U2J (7U) 50 (1H)
Capacitance (Capacitance part numbering code) and T (mm) Dimension (T Dimension part numbering code) 470pF(471) 560pF(561) 680pF(681) 820pF(821) 1000pF(102) 1200pF(122) 1500pF(152) 1800pF(182) 2200pF(222) 2700pF(272) 3300pF(332) 3900pF(392) 4700pF(472) 5600pF(562) 6800pF(682) 8200pF(822) 10000pF(103) 12000pF(123) 15000pF(153) 18000pF(183) 22000pF(223) 27000pF(273) 33000pF(333) 39000pF(393) 47000pF(473)
The part numbering code is shown in ( ). Dimensions are shown in mm and Rated Voltage in Vdc.
0.60(6) 0.60(6) 0.85(9) 0.85(9) 0.85(9)
1.25(B) 1.25(B)
0.85(9) 1.25(B) 1.25(B)
0.85(9) 1.25(B) 1.25(B) 1.25(B)
1.25(B)
0.85(9) 0.85(9) 0.85(9) 1.25(B) 1.25(B) 1.25(B) 1.25(B) 0.60(6) 0.60(6) 0.60(6) 0.85(9) 0.85(9) 0.85(9) 1.25(B) 1.25(B) 0.85(9) 0.85(9) 1.25(B) 1.25(B) 0.60(6) 0.60(6) 0.60(6) 0.60(6) 0.85(9) 0.85(9) 1.00(A) 1.25(B) 1.25(B) 0.60(6) 0.60(6) 0.60(6) 0.60(6) 0.85(9) 0.85(9) 1.00(A) 1.25(B) 1.25(B) 1.25(B) 1.25(B) 1.25(B) 1.25(B) 1.25(B) 1.25(B) 1.25(B) 0.60(6) 0.60(6) 0.60(6) 0.85(9) 0.85(9) 0.85(9) 1.25(B) 1.25(B)
0.60(6) 0.60(6) 0.60(6) 0.60(6) 0.60(6) 0.60(6) 0.85(9) 0.85(9) 0.85(9) 0.85(9) 1.25(B) 1.25(B) 1.25(B)
1.25(B)
Temperature Compensating Type GRM31 Series (3.20x1.60 mm) 500V/200V/100V/50V/25V
Part Number L x W [EIA] TC Rated Volt. GRM31
3.20x1.60 [1206] C0G (5C) 500 (2H) 200 (2D) 50 (1H) 25 (1E) C0H (6C) 25 (1E) P2H (6P) 50 (1H) R2H (6R) 50 (1H) S2H (6S) 50 (1H) 200 (2D) 100 (2A) SL (1X) 50 (1H) 25 (1E) T2H (6T) 50 (1H) U2J (7U) 50 (1H)
Capacitance (Capacitance part numbering code) and T (mm) Dimension (T Dimension part numbering code) 1.0pF(1R0) 2.0pF(2R0) 3.0pF(3R0) 4.0pF(4R0) 5.0pF(5R0) 6.0pF(6R0) 7.0pF(7R0) 8.0pF(8R0) 9.0pF(9R0) 10pF(100) 12pF(120) 15pF(150) 18pF(180) 22pF(220) 1.15(M) 1.15(M) 1.15(M) 1.15(M) 1.15(M) 1.15(M) 1.15(M) 1.15(M) 1.15(M) 1.15(M) 1.15(M) 1.15(M) 1.15(M) 1.15(M)
Continued on the following page.
10
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
C02E10.pdf 04.1.20
www..com
Part Number L x W [EIA] TC Rated Volt.
Continued from the preceding page.
GRM31
3.20x1.60 [1206] C0G (5C) 500 (2H) 200 (2D) 50 (1H) 25 (1E) C0H (6C) 25 (1E) P2H (6P) 50 (1H) R2H (6R) 50 (1H) S2H (6S) 50 (1H) 200 (2D) 100 (2A) SL (1X) 50 (1H) 25 (1E) T2H (6T) 50 (1H) U2J (7U) 50 (1H)
1
Capacitance (Capacitance part numbering code) and T (mm) Dimension (T Dimension part numbering code) 27pF(270) 33pF(330) 39pF(390) 47pF(470) 56pF(560) 68pF(680) 82pF(820) 270pF(271) 330pF(331) 390pF(391) 470pF(471) 560pF(561) 680pF(681) 820pF(821) 1000pF(102) 1200pF(122) 1500pF(152) 1800pF(182) 2200pF(222) 2700pF(272) 3300pF(332) 3900pF(392) 4700pF(472) 5600pF(562) 6800pF(682) 8200pF(822) 10000pF(103) 12000pF(123) 15000pF(153) 27000pF(273) 33000pF(333) 47000pF(473) 56000pF(563) 68000pF(683) 82000pF(823) 0.10F(104) 1.60(C) 0.85(9) 0.85(9) 1.15(M) 0.85(9) 1.15(M) 1.15(M) 1.15(M) 0.85(9) 1.15(M) 1.15(M) 1.15(M) 0.85(9) 0.85(9) 0.85(9) 0.85(9) 0.85(9) 1.15(M) 0.85(9) 0.85(9) 0.85(9) 0.85(9) 1.15(M) 1.15(M) 1.15(M) 1.15(M) 1.15(M) 1.15(M) 1.15(M) 1.15(M) 1.15(M) 1.15(M) 1.15(M) 1.15(M) 1.15(M) 1.15(M) 1.15(M) 1.15(M) 1.15(M)
1.15(M) 1.15(M) 1.15(M) 1.15(M) 1.15(M) 1.15(M) 1.15(M) 1.15(M) 1.15(M) 1.15(M) 1.15(M) 1.15(M) 1.15(M) 0.85(9) 0.85(9) 0.85(9) 1.15(M) 1.15(M) 1.15(M) 1.15(M) 1.15(M) 1.15(M) 1.15(M) 1.15(M) 1.15(M) 0.85(9) 0.85(9) 0.85(9) 1.15(M) 1.15(M)
The part numbering code is shown in ( ). Dimensions are shown in mm and Rated Voltage in Vdc.
High Dielectric Constant Type X5R (R6) Characteristics
TC Part Number L x W [EIA] Rated Volt. GRM15 GRM18
X5R (R6)
GRM21 GRM31
1.00x0.50 [0402] 16 (1C) 10 (1A)
1.60x0.80 [0603] 10 (1A) 6.3 (0J)
2.00x1.25 [0805] 10 (1A) 6.3 (0J)
3.20x1.60 [1206] 10 (1A) 6.3 (0J)
Capacitance (Capacitance part numbering code) and T (mm) Dimension (T Dimension part numbering code) 68000pF(683) 0.10F(104) 0.33F(334) 0.50(5) 0.50(5) 0.50(5) 0.80(8)
Continued on the following page.
11
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
C02E10.pdf 04.1.20
www..com
Continued from the preceding page.
1
TC Part Number L x W [EIA] Rated Volt. GRM15 GRM18
X5R (R6)
GRM21 GRM31
1.00x0.50 [0402] 16 (1C) 10 (1A)
1.60x0.80 [0603] 10 (1A) 6.3 (0J)
2.00x1.25 [0805] 10 (1A) 6.3 (0J)
3.20x1.60 [1206] 10 (1A) 6.3 (0J)
Capacitance (Capacitance part numbering code) and T (mm) Dimension (T Dimension part numbering code) 0.47F(474) 0.68F(684) 1.0F(105) 1.5F(155) 2.2F(225) 3.3F(335) 4.7F(475) 10F(106)
The part numbering code is shown in each ( ). 3.3F and 4.7F, 6.3V rated are GRM21 series of L: 20.15, W: 1.250.15, T: 1.250.15. T: 1.150.1mm is also available for GRM31 1.0F for 16V. L: 3.20.2, W: 1.60.2 for GRM31 16V 1.0F type. Also L: 3.20.2, W: 1.60.2, T: 1.150.15 for GRM31 16V 1.5F and 2.2F type. Dimensions are shown in mm and Rated Voltage in Vdc.
0.80(8) 0.80(8) 0.80(8) 0.80(8) 0.85(9) 0.85(9) 1.25(B) 1.25(B) 1.25(B) 1.25(B) 0.85(9) 1.30(X) 1.60(C) 1.60(C) 1.15(M) 1.60(C)
High Dielectric Constant Type X7R (R7) Characteristics
TC Part Number L x W [EIA] Rated Volt. GRM15 GRM18
X7R (R7)
GRM21 GRM31
1.00x0.50 [0402] 50 (1H) 25 (1E) 16 (1C) 10 (1A) 100 (2A)
1.60x0.80 [0603] 50 (1H) 25 (1E) 16 (1C) 10 (1A) 100 (2A)
2.00x1.25 [0805] 50 (1H) 25 (1E) 16 (1C) 100 (2A)
3.20x1.60 [1206] 50 (1H) 25 (1E) 16 (1C) 10 (1A)
Capacitance (Capacitance part numbering code) and T (mm) Dimension (T Dimension part numbering code) 220pF (221) 330pF (331) 470pF (471) 680pF (681) 1000pF (102) 1500pF (152) 2200pF (222) 3300pF (332) 4700pF (472) 6800pF (682) 10000pF (103) 15000pF (153) 22000pF (223) 33000pF (333) 0.50 (5) 0.50 (5) 0.50 (5) 0.50 (5) 0.50 (5) 0.50 (5) 0.50 (5) 0.50 (5) 0.50 (5) 0.50 (5) 0.50 (5) 0.50 (5) 0.50 (5) 0.50 (5) 0.80 (8) 0.80 (8) 0.80 (8) 0.80 (8) 0.80 (8) 0.80 (8) 0.80 (8) 0.80 (8) 0.80 (8) 0.80 (8) 0.80 (8) 0.80 (8) 0.80 (8) 0.80 (8) 0.80 (8) 0.80 (8) 0.80 (8) 0.85 (9) 1.15 (M)
Continued on the following page.
0.85 (9) 0.85 (9) 1.25 (B)
12
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
C02E10.pdf 04.1.20
www..com
TC Part Number L x W [EIA] Rated Volt.
Continued from the preceding page.
X7R (R7)
GRM15 GRM18 GRM21 GRM31
1
2.00x1.25 [0805] 3.20x1.60 [1206] 16 (1C) 100 (2A) 50 (1H) 25 (1E) 16 (1C) 10 (1A) 50 (1H) 25 (1E)
1.00x0.50 [0402] 50 (1H) 25 (1E) 16 (1C) 10 (1A) 100 (2A)
1.60x0.80 [0603] 50 (1H) 25 (1E) 16 (1C) 10 (1A) 100 (2A)
Capacitance (Capacitance part numbering code) and T (mm) Dimension (T Dimension part numbering code) 47000pF (473) 68000pF (683) 0.10F (104) 0.15F (154) 0.22F (224) 0.33F (334) 0.47F (474) 0.68F (684) 1.0F (105) 1.5F (155) 2.2F (225) 3.3F (335) 4.7F (475) 0.50 (5) 0.50 (5) 0.50 (5) 0.80 (8) 0.80 (8) 0.80 (8) 0.80 (8) 0.80 (8) 0.80 (8) 0.80 (8) 0.80 (8) 0.80 (8) 0.80 (8) 0.80 (8) 1.25 (B) 1.25 (B) 1.25 (B) 1.25 (B) 1.25 (B) 0.85 (9) 1.25 (B) 1.25 (B) 1.25 (B) 0.85 (9) 1.25 (B) 1.25 (B) 0.85 (9) 0.85 (9) 1.25 (B) 1.15 (M) 1.60 (C) 1.60 (C) 1.60 (C) 1.60 (C) 0.85 (9) 1.15 (M) 0.85 (9) 1.15 (M) 0.85 (9) 1.15 (M) 1.15 (M) 0.85 (9) 0.85 (9) 1.15 (M)
The part numbering code is shown in each ( ). The tolerance will be changed to L: 3.20.2, W: 1.60.2 for GRM31 16V 1.0F type. Also L: 3.20.2, W: 1.60.2, T: 1.150.15 for GRM31 16V 1.5F and 2.2F type. Dimensions are shown in mm and Rated Voltage in Vdc.
High Dielectric Constant Type Y5V (F5) Characteristics
TC Part Number L x W [EIA] Rated Volt. GRM15 GRM18
Y5V (F5)
GRM21 GRM31
1.00x0.50 [0402] 50 (1H) 25 (1E) 16 (1C) 100 (2A)
1.60x0.80 [0603] 50 (1H) 25 (1E) 16 (1C) 10 (1A) 50 (1H)
2.00x1.25 [0805] 25 (1E) 16 (1C) 10 (1A) 50 (1H)
3.20x1.60 [1206] 25 (1E) 16 (1C) 10 (1A) 6.3 (0J)
Capacitance (Capacitance part numbering code) and T (mm) Dimension (T Dimension part numbering code) 2200pF (222) 4700pF (472) 10000pF (103) 22000pF (223) 47000pF (473) 0.10F (104) 0.50 (5) 0.50 (5) 0.50 (5) 0.50 (5) 0.50 (5) 0.50 (5) 0.50 (5) 0.80 (8) 0.80 (8) 0.80 (8) 0.80 (8) 0.80 (8) 0.80 (8) 0.85 (9)
Continued on the following page.
13
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
C02E10.pdf 04.1.20
www..com
Continued from the preceding page.
1
TC Part Number L x W [EIA] Rated Volt. GRM15 GRM18
Y5V (F5)
GRM21 GRM31
1.00x0.50 [0402] 50 (1H) 25 (1E) 16 (1C) 100 (2A)
1.60x0.80 [0603] 50 (1H) 25 (1E) 16 (1C) 10 (1A) 50 (1H)
2.00x1.25 [0805] 25 (1E) 16 (1C) 10 (1A) 50 (1H)
3.20x1.60 [1206] 25 (1E) 16 (1C) 10 (1A) 6.3 (0J)
Capacitance (Capacitance part numbering code) and T (mm) Dimension (T Dimension part numbering code) 0.22F (224) 0.47F (474) 1.0F (105) 2.2F (225) 4.7F (475) 10F (106)
The part numbering code is shown in each ( ). T: 1.250.1mm is also available for GRM21 25V or 16V 1.0F type. Dimensions are shown in mm and Rated Voltage in Vdc.
0.80 (8) 0.80 (8) 0.80 (8) 0.80 (8) 0.80 (8)
1.25 (B)
0.85 (9) 1.25 (B) 0.85 (9) 1.25 (B) 0.85 (9) 1.25 (B) 0.85 (9) 1.25 (B) 1.25 (B) 1.15 (M) 1.60 (C) 1.15 (M) 1.15 (M) 0.85 (9) 1.15 (M) 1.15 (M) 0.85 (9) 1.15 (M) 1.15 (M) 1.15 (M)
High Dielectric Constant Type Z5U (E4) Characteristics
TC Part Number L x W [EIA] Rated Volt. GRM18
Z5U (E4)
GRM21 GRM31
1.60x0.80 [0603] 50 (1H)
2.00x1.25 [0805] 50 (1H)
3.20x1.60 [1206] 50 (1H)
Capacitance (Capacitance part numbering code) and T (mm) Dimension (T Dimension part numbering code) 10000pF(103) 22000pF(223) 47000pF(473) 0.10F(104) 0.22F(224)
The part numbering code is shown in ( ). Dimensions are shown in mm and Rated Voltage in Vdc.
0.80(8) 0.80(8) 0.60(6) 0.85(9) 0.85(9)
14
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
C02E10.pdf 04.1.20
www..com
GRM Series Specifications and Test Methods
Specifications No. Item Temperature Compensating Type Test Method High Dielectric Type R6 : Y55 to W85D R7 : Y55 to W125D E4 : W10 to W85D F5 : Y30 to W85D The rated voltage is defined as the maximum voltage which may be applied continuously to the capacitor. When AC voltage is superimposed on DC voltage, VP-P or VO-P, whichever is larger, should be maintained within the rated voltage range. Visual inspection Using calipers on micrometer No failure should be observed when *300% of the rated voltage (C0 to U2J and SL) or *250% of the rated voltage (X5R, X7R, Z5U and Y5V) is applied between the terminations for 1 to 5 seconds, provided the charge/discharge current is less than 50mA. *200% for 500V The insulation resistance should be measured with a DC voltage not exceeding the rated voltage at 25D and 75%RH max. and within 2 minutes of charging. The capacitance/Q/D.F. should be measured at 25D at the frequency and voltage shown in the table. [R6, R7] W.V. : 25Vmin. : 0.025max. W.V. : 16/10V : 0.035max. W.V. : 6.3V 0.05max.(CF3.3F) 0.1max.(CU3.3F) [E4] W.V. : 25Vmin. : 0.025max. [F5] W.V. : 25Vmin. : 0.05max.(CF0.10F) : 0.09max.(CU0.10F) W.V. : 16V/10V : 0.125max. W.V. : 6.3Vmax. : 0.15max. R6 : WithinT15% (Y55 to W85D) R7 : Within15% (Y55 to W125D) E4 : Within W22/Y56% (W10 to W85D) F5 : Within W22/Y82% (Y30 to W85D) Char. Item C to 7U, 1X (1000pF and below) C to 7U, 1X (more than 1000pF) R6, R7, F5 (10F and below) R6, R7, F5 (more than 10F) E4 Frequency 1T0.1MHz Voltage 0.5 to 5Vrms
1
Operating Temperature
Y55 to W125D
4
2 Rated Voltage See the previous page.
3 4
Appearance Dimensions
No defects or abnormalities Within the specified dimensions
5
Dielectric Strength
No defects or abnormalities
6 7
Insulation Resistance Capacitance
More than 10,000M or 500 * F (Whichever is smaller) Within the specified tolerance
8
Q/ Dissipation Factor (D.F.)
30pFmin. : Q U1000 30pFmax. : Q U400+20C C : Nominal Capacitance (pF)
1T0.1kHz
1T0.2Vrms
1T0.1kHz
1T0.2Vrms
120T24Hz 1T0.1kHz
0.5T0.1Vrms 0.5T0.05Vrms
Capacitance Change
Within the specified tolerance (Table A)
9
Capacitance Temperature Characteristics
The capacitance change should be measured after 5 min. at each specified temperature stage. (1) Temperature Compensating Type The temperature coefficient is determined using the Capacitance measured in step 3 as a reference. When cycling the temperature sequentially from step 1 through 5 (C0 : W25D to W125D : other temp. coeffs. : W25D to W85D) the capacitance should be within the specified tolerance for the temperature coefficient and capacitance change as Table A. The capacitance drift is calculated by dividing the differences between the maximum and minimum measured values in steps 1, 3 and 5 by the capacitance value in step 3. Step 1 2 3 4 Temperature(D) 25T2 Y55T3 (for C to 7U/1X/R6/R7) Y30T3 (for F5) 10T3 (for E4) 25T2 125T3 (for C/R7) 85T3 (for other TC) 25T2
Temperature Coefficient
Within the specified tolerance (Table A)
Capacitance Drift
Within T0.2% or T0.05pF (Whichever is larger.) *Does not apply to 1X/25V
5
(2) High Dielectric Constant Type The ranges of capacitance change compared with the above 25D value over the temperature ranges shown in the table should be within the specified ranges.
Continued on the following page.
22
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
C02E10.pdf 04.1.20
www..com
GRM Series Specifications and Test Methods
Continued from the preceding page.
Specifications No. Item Temperature Compensating Type Test Method High Dielectric Type Solder the capacitor to the test jig (glass epoxy board) shown in Fig. 1 using a eutectic solder. Then apply 10N* force in parallel with the test jig for 10T1sec. The soldering should be done either with an iron or using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. *2N (GRp03) 5N (GRp15, GRM18)
c
4
b
10
Adhesive Strength of Termination
No removal of the terminations or other defect should occur.
Type GRp03 GRp15 GRM18 GRM21 GRM31 GRM32 GRM43 GRM55
a 0.3 0.4 1.0 1.2 2.2 2.2 3.5 4.5 Fig. 1
b 0.9 1.5 3.0 4.0 5.0 5.0 7.0 8.0
a Solder resist Baked electrode or copper foil
c 0.3 0.5 1.2 1.65 2.0 2.9 3.7 5.6 (in mm)
Appearance Capacitance
No defects or abnormalities Within the specified tolerance [R6, R7] W.V. : 25Vmin. : 0.025max. W.V. : 16/10V : 0.035max. W.V. : 6.3V : 0.05max. (CF3.3F) 0.1max. (C U3.3F) [E4] W.V. : 25Vmin. : 0.025max. [F5] W.V. : 25Vmin. : 0.05max. (CF0.10F) : 0.09max. (C U0.10F) W.V. : 16V/10V : 0.125max. W.V. : 6.3Vmax. : 0.15max. Solder the capacitor to the test jig (glass epoxy board) in the same manner and under the same conditions as (10). The capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55Hz. The frequency range, from 10 to 55Hz and return to 10Hz, should be traversed in approximately 1 minute. This motion should be applied for a period of 2 hours in each of 3 mutually perpendicular directions (total of 6 hours).
11
Vibration Resistance Q/D.F.
30pFmin. : QU1000 30pFmax. : QU400W20C C : Nominal Capacitance (pF)
No crack or marked defect should occur.
Solder the capacitor on the test jig (glass epoxy board) shown in Fig. 2 using a eutectic solder. Then apply a force in the direction shown in Fig. 3. The soldering should be done either with an iron or using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock.
TR S RT QS Q ,, T S
c 40 a
b
4.5
20
50 Pressurizing speed : 1.0mm/sec. Pressurize
12
Deflection
100
R230
t : 1.6mm (GRp03/15 : 0.8mm)
Type GRp03 GRp15 GRM18 GRM21 GRM31 GRM32 GRM43 GRM55
a 0.3 0.4 1.0 1.2 2.2 2.2 3.5 4.5
b 0.9 1.5 3.0 4.0 5.0 5.0 7.0 8.0
c 0.3 0.5 1.2 1.65 2.0 2.9 3.7 5.6
Flexure : V1 Capacitance meter 45 45
Fig. 3
(in mm) Fig. 2
Continued on the following page.
23
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
C02E10.pdf 04.1.20
www..com
GRM Series Specifications and Test Methods
Continued from the preceding page.
Specifications No. Item Temperature Compensating Type Test Method High Dielectric Type Immerse the capacitor in a solution of ethanol (JIS-K-8101) and rosin (JIS-K-5902) (25% rosin in weight proportion). Preheat at 80 to 120D for 10 to 30 seconds. After preheating, immerse in eutectic solder solution for 2T0.5 seconds at 230T5D.
13
Solderability of Termination
75% of the terminations are to be soldered evenly and continuously.
4
The measured and observed characteristics should satisfy the specifications in the following table. Appearance Capacitance Change No marking defects Within T2.5% or T0.25pF (Whichever is larger) R6, R7 : Within T7.5% E4, F5 : Within T20% [R6, R7] W.V. : 25Vmin. : 0.025max. W.V. : 16/10V : 0.035max. W.V. : 6.3V : 0.05max. (CF3.3F) 0.1max. (C U3.3F) [E4] W.V. : 25Vmin. : 0.025max. [F5] W.V. : 25Vmin. : 0.05max. (CF0.10F) : 0.09max. (C U0.10F) W.V. : 16V/10V : 0.125max. W.V. : 6.3Vmax. : 0.15max. I.R. Dielectric Strength More than 10,000M or 500 * F (Whichever is smaller) No failure The measured and observed characteristics should satisfy the specifications in the following table. Appearance Capacitance Change No marking defects Within T2.5% or T0.25pF (Whichever is larger) R6, R7 : Within T7.5% E4, F5 : Within T20% [R6, R7] W.V. : 25Vmin. : 0.025max. W.V. : 16/10V : 0.035max. W.V. : 6.3V 0.05max. (CF3.3F) 0.1max. (C U3.3F) [E4] W.V. : 25Vmin. : 0.025max. [F5] W.V. : 25Vmin. : 0.05max. (CF0.10F) : 0.09max. (C U0.10F) W.V. : 16V/10V : 0.125max. W.V. : 6.3Vmax. : 0.15max. I.R. Dielectric Strength More than 10,000M or 500 * F (Whichever is smaller) No failure
Preheat the capacitor at 120 to 150D for 1 minute. Immerse the capacitor in a eutectic solder solution at 270T5D for 10T0.5 seconds. Let sit at room temperature for 24T2 hours (temperature compensating type) or 48T4 hours (high dielectric constant type), then measure. #Initial measurement for high dielectric constant type W0 Perform a heat treatment at 150 Y10D for one hour and then let sit for 48T4 hours at room temperature. Perform the initial measurement. *Preheating for GRM32/43/55 Step 1 2 Temperature 100D to 120D 170D to 200D Time 1 min. 1 min.
Resistance to 14 Soldering Q/D.F. Heat
30pFmin. : Q U1000 30pFmax. : Q U400W20C C : Nominal Capacitance (pF)
Fix the capacitor to the supporting jig in the same manner and under the same conditions as (10). Perform the five cycles according to the four heat treatments listed in the following table. Let sit for 24T2 hours (temperature compensating type) or 48T4 hour (high dielectric constant type) at room temperature, then measure. Step Temp. (D) Time (min.) 1 2 3 4 Max. Min. Room Room Operating Operating Temp. Temp. Temp.W3/Y0 Temp.W0/Y3 30T3 2 to 3 30T3 2 to 3
15
Temperature Cycle Q/D.F.
30pFmin. : Q U1000 30pFmax. : Q U400W20C C : Nominal Capacitance (pF)
#Initial measurement for high dielectric constant type W0 Perform a heat treatment at 150 Y10D for one hour and then let sit for 48T4 hours at room temperature. Perform the initial measurement.
Continued on the following page.
24
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
C02E10.pdf 04.1.20
www..com
GRM Series Specifications and Test Methods
Continued from the preceding page.
Specifications No. Item Temperature Compensating Type Test Method High Dielectric Type
The measured and observed characteristics should satisfy the specifications in the following table. Appearance Capacitance Change No marking defects Within T5% or T0.5pF (Whichever is larger) R6, R7 : Within T12.5% E4, F5 : Within T30% [R6, R7] W.V. : 25Vmin. : 0.05max. W.V. : 16/10V : 0.05max. W.V. : 6.3V 0.075max. (CF3.3F) 0.125max. (CU3.3F) [E4] W.V. : 25Vmin. : 0.05max. [F5] W.V. : 25Vmin. : 0.075max. (CF0.10F) : 0.125max. (CU0.10F) W.V. : 16V/10V : 0.15max. W.V. : 6.3Vmax. : 0.2max.
4
16
Humidity Steady State
Q/D.F.
30pF and over : QU350 10pF and over 30pF and below : QU275W5C/2 10pF and below : QU200W10C C : Nominal Capacitance (pF)
Let the capacitor sit at 40T2D and 90 to 95% humidity for 500T12 hours. Remove and let sit for 24T2 hours (temperature compensating type) or 48T4 hours (high dielectric constant type) at room temperature, then measure.
I.R. Dielectric Strength
More than 1,000M or 50 * F (Whichever is smaller) No failure The measured and observed characteristics should satisfy the specifications in the following table.
Appearance
No marking defects R6, R7 : Within T12.5% E4 : Within T30% F5 : Within T30% [W.V. : 10Vmax.] F5 : Within W30/Y40% [R6, R7] W.V. : 25Vmin. : 0.05max. W.V. : 16/10V : 0.05max. W.V. : 6.3V 0.075max. (CF3.3F) 0.125max. (CU3.3F) [E4] W.V. : 25Vmin. : 0.05max. [F5] W.V. : 25Vmin. : 0.075max. (CF0.10F) : 0.125max. (CU0.10F) W.V. : 16V/10V : 0.15max. W.V. : 6.3Vmax. : 0.2max. Apply the rated voltage at 40T2D and 90 to 95% humidity for 500T12 hours. Remove and let sit for 24T2 hours (temperature compensating type) or 48T4 hours (high dielectric constant type) at room temperature, then measure. The charge/discharge current is less than 50mA. #Initial measurement for F5/10V max. Apply the rated DC voltage for 1 hour at 40T2D. Remove and let sit for 48T4 hours at room temperature. Perform initial measurement.
Capacitance Change
Within T7.5% or T0.75pF (Whichever is larger)
17
Humidity Load Q/D.F.
30pF and over : QU200 30pF and below : QU100+10C/3 C : Nominal Capacitance (pF)
I.R. Dielectric Strength
More than 500M or 25 * F (Whichever is smaller) No failure
Continued on the following page.
25
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
C02E10.pdf 04.1.20
www..com
GRM Series Specifications and Test Methods
Continued from the preceding page.
Specifications No. Item Temperature Compensating Type Test Method High Dielectric Type
The measured and observed characteristics should satisfy the specifications in the following table. Appearance No marking defects R6, R7 : Within T12.5% E4 : Within T30% F5 : Within T30% (CapF1.0F) F5 : Within W30/Y40% (CapU1.0F) [R6, R7] W.V. : 25Vmin. : 0.05max. W.V. : 16/10V : 0.05max. W.V. : 6.3V 0.075max. (CF3.3F) 0.125max. (CU3.3F) [E4] W.V. : 25Vmin. : 0.05max [F5] W.V. : 25Vmin. : 0.075max. (CF0.10F) : 0.125max. (CU0.10F) W.V. : 16V/10V : 0.15max. W.V. : 6.3Vmax. : 0.2max.
4
Capacitance Change Within T3% or T0.3pF (Whichever is larger)
18
High Temperature Load Q/D.F.
30pF and over : QU350 10pF and over 30pF and below : QU275+5C/2 10pF and below : QU200+10C C : Nominal Capacitance (pF)
Apply 200% of the rated voltage for 1000T12 hours at the maximum operating temperature T3D. Let sit for 24T2 hours (temperature compensating type) or 48T4 hours (high dielectric constant type) at room temperature, then measure. The charge/discharge current is less than 50mA. #Initial measurement for high dielectric constant type. Apply 200% of the rated DC voltage for one hour at the maximum operating temperature T3D. Remove and let sit for 48T4 hours at room temperature. Perform initial measurement. *150% for 500V and CU10F
I.R. Dielectric Strength
More than 1,000M or 50 #F (Whichever is smaller) No failure
Table A
Capacitance Change from 25D (%) Char. Code Nominal Values (ppm/D)* Y55 Y30 Max. 0.25 0.38 1.02 1.32 1.79 2.39 3.84 Y Y10 Min. Y0.11 Y0.21 0.32 0.56 0.95 1.44 2.21 Y Max. Min. Max. Min. Y0.24 Y0.17 0.58 0.40 Y000 T030 5C Y0.48 Y0.33 0.87 0.59 Y000 T060 6C 0.72 0.50 2.33 1.61 Y150 T060 6P 1.28 0.88 3.02 2.08 Y220 T060 6R 2.16 1.49 4.09 2.81 Y330 T060 6S 3.28 2.26 5.46 3.75 Y470 T060 6T 5.04 3.47 8.78 6.04 Y750 T120 7U Y Y Y Y W350 to Y1000 1X *Nominal values denote the temperature coefficient within a range of 25D to 125D (for C)/85D (for other TC).
26

▲Up To Search▲

Price & Availability of GRM216XXXXXX

	To Download GRM216XXXXXX Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .